OnePlus phone, you might have encountered the need to recover the firmware at some point. Firmware recovery is a process that is used to restore your phone to its original state when it is not functioning correctly due to various reasons like corrupted firmware or a failed software update. In this article, we will guide you through the process of firmware recovery on a OnePlus phone.
Before we begin, it is essential to note that firmware recovery is an advanced process that can potentially damage your phone permanently. Therefore, it is crucial to follow the instructions carefully and have some technical expertise before attempting this process.
Step 1: Download the Firmware
The first step is to download the firmware for your OnePlus phone. To do this, go to the official OnePlus website and download the firmware that corresponds to your phone model. Ensure that the firmware version you download matches the version installed on your phone.
Step 2: Enable USB Debugging
To proceed with the recovery process, you must first enable USB debugging on your OnePlus phone. To do this, go to Settings > About Phone and tap on Build Number seven times to enable developer options. Then, go to Developer Options and turn on USB Debugging.
Step 3: Install ADB and Fastboot
ADB and Fastboot are essential tools required for the firmware recovery process. To install these tools, follow the steps below:
Download the ADB and Fastboot tools from the Android Developers website.
Extract the downloaded file to a folder on your computer.
Open the extracted folder and press the Shift key while right-clicking anywhere in the folder.
Click on "Open PowerShell window here" or "Open command window here" depending on your operating system.
Type the command "adb devices" and press Enter to check if your device is detected. If your phone is not detected, you may need to install the appropriate drivers.
Step 4: Boot Your Phone into Fastboot Mode
To boot your OnePlus phone into Fastboot mode, follow the steps below:
Power off your phone.
Press and hold the Power button and Volume Up button simultaneously until the OnePlus logo appears.
Release the Power button while continuing to hold the Volume Up button until your phone enters Fastboot mode.
Step 5: Connect Your Phone to Your Computer
Connect your OnePlus phone to your computer using a USB cable. Ensure that the USB debugging option is enabled on your phone.
Step 6: Flash the Firmware
To flash the firmware, follow the steps below:
Open the folder where you extracted the firmware file in Step 1.
Press the Shift key while right-clicking anywhere in the folder and click on "Open PowerShell window here" or "Open command window here."
Type the command "fastboot devices" and press Enter to check if your device is detected. If your phone is not detected, you may need to install the appropriate drivers.
Type the command "fastboot flash system system.img" and press Enter to flash the firmware. Replace "system.img" with the actual name of the firmware file you downloaded.
Wait for the process to complete. Do not disconnect your phone during the process.
Once the firmware is flashed, type the command "fastboot reboot" and press Enter to reboot your phone.
Congratulations! You have successfully recovered the firmware on your OnePlus phone.
In conclusion, firmware recovery is a crucial process that can help restore your OnePlus phone to its original state when it is not functioning correctly. However, it is crucial to follow the instructions carefully and have some technical expertise before attempting this process. We hope this guide has been helpful in guiding you through the process of firmware recovery on your OnePlus phone.
No comments:
Post a Comment